Parameters |
JESD-609 Code |
e3 |
Feature |
Shutdown, Thermal Protection |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Class AB |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Audio/Video Amplifiers |
Technology |
CMOS |
Voltage - Supply |
2.7V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.65mm |
Base Part Number |
LM4864 |
Pin Count |
8 |
Output Type |
1-Channel (Mono) |
Operating Supply Voltage |
5V |
Supply Voltage-Min (Vsup) |
2.7V |
Number of Channels |
1 |
Nominal Supply Current |
3.6mA |
Quiescent Current |
3.6mA |
Output Power |
675mW |
Supply Type |
Single |
Bandwidth |
20 kHz |
Power Supply Rejection Ratio (PSRR) |
50dB |
Max Output Power |
725mW |
Max Output Power x Channels @ Load |
675mW x 1 @ 8 Ω |
Harmonic Distortion |
1% |
Load Impedance |
8Ohm |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Cut Tape (CT) |
Series |
Boomer® |
LM4864MM/NOPB Overview
Amp parts is embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.This device is packaged in the way of Cut Tape (CT) .8 terminations occur when a transmission line is terminated by a device with the same characteristic impedance as the transmission line.1-Channel (Mono) is used for its output.The device belongs to the Class AB type of electrical devices.In a computer or other communication device, there are 8 pins, which are pronged contacts.This electronic part is mounted in the way of Surface Mount .There is 2.7V~5.5V voltage supply to this electrical device.This device is equipped with a total of 1 channels.When operating, Shutdown, Thermal Protection can be ensured.During operation, the temperature should not exceed -40°C~85°C TA .The device contains 8 pins.Amp parts is included in Audio/Video Amplifiers .This is a member of the LM4864 family.The electronic part is mounted in the way of Surface Mount .In this electronic part, the output power is a maximum of 725mW kWh per hour.Amp parts is important to keep the supply voltage (Vsup) above 2.7V so that the device functions normally.Electronic parts with Single supply types are available.Amp parts is a part of the Boomer? series.There is 3.6mA external influence on the consumption of quiescent current: it consumes 3.6mA of quiescent current.
LM4864MM/NOPB Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
8 pin count
LM4864 family
725mW kWh per hour
Boomer? series
LM4864MM/NOPB Applications
There are a lot of Texas Instruments LM4864MM/NOPB audio amplifiers applications.
- Logarithmic and exponential operation circuits
- Signal amplification
- Radar
- Multiplication and division circuits
- Vehicle electronics
- Fast A/D and D/A converters, video amplifiers
- Active probe
- Comparator
- Addition and subtraction operation circuits
- Scintillation detectors