LM4871M/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | Boomer® |
| JESD-609 Code | e3 |
| Feature | Shutdown, Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class AB |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | LM4871 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 1 |
| Quiescent Current | 6.5mA |
| Output Power | 3W |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 50mV |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Max Output Power | 3W |
| Max Output Power x Channels @ Load | 3W x 1 @ 3 Ω |
| Harmonic Distortion | 10% |
| Number of Amplifiers | 1 |
| Load Impedance | 8Ohm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM4871M/NOPB Overview
This package is embedded in 8-SOIC (0.154, 3.90mm Width) .Tube is the packaging method.Amp parts uses 1-Channel (Mono) as the output.The type of this electrical device is Class AB .8 pins are pronged contacts on a computer or other communication device that form a signal interface.This electronic part is mounted in the way of Surface Mount .This electrical device operates at 2V~5.5V volts.There are no channels on the device.Ensure that Shutdown, Thermal Protection is maintained when operating.Ideally, the operating temperature should not exceed -40°C~85°C TA .The number of pins is 8 .Audio/Video Amplifiers incorporates this part.Amp parts is included in the LM4871 family.The chip should be mounted in the way of Surface Mount .The maximal Output Power of this electronic part is 3W kWh per hour.A normal operation is dependent upon the supply voltage (Vsup) remaining above 2V .5.5V is the maximum supply voltage (Vsup).A Single supply type is used for this electronic part.This electronic part is a member of Boomer? series.The device consumes 6.5mA quiescent currentThis list contains 1 amplifiers, which are electronic devices used to increase a signal's voltage, current, or power.
LM4871M/NOPB Features
8-SOIC (0.154, 3.90mm Width) package
8 pin count
LM4871 family
3W kWh per hour
Boomer? series
LM4871M/NOPB Applications
There are a lot of Texas Instruments LM4871M/NOPB audio amplifiers applications.
- Semiconductor detectors
- Active probe
- High-frequency data acquisition systems
- Fast A/D and D/A converters, video amplifiers
- Switching amplifier
- Band-pass filter
- Test and measurement instruments
- Instrumentation
- Industrial control system
- pH (acidity)
