LM4871MX/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Boomer® |
| JESD-609 Code | e3 |
| Feature | Shutdown, Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | LM4871 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 1 |
| Nominal Supply Current | 6.5mA |
| Quiescent Current | 6.5mA |
| Output Power | 3W |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Max Output Power | 3W |
| Max Output Power x Channels @ Load | 3W x 1 @ 3 Ω |
| Harmonic Distortion | 10% |
| Load Impedance | 3Ohm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
LM4871MX/NOPB Overview
In 8-SOIC (0.154, 3.90mm Width) is embedded this device.Amp parts is recommended that the chip be packaged in a Tape & Reel (TR) case.8 terminations consist of terminating transmission lines with devices that match their characteristic impedance.Output 1-Channel (Mono) is configured for this device.An electrical device of type Class AB is involved.The computer or other communication device has 8 pins, which are pronged contacts.In this case, the electronic part is mounted in the way of Surface Mount .There is 2V~5.5V supply voltage for this electrical device.The number of channels is growing strong/weak: 1 .When operating, it is possible to ensure Shutdown, Thermal Protection .Ideally, the operating temperature should not exceed -40°C~85°C TA .A total of 8 pins are present on the device.Audio/Video Amplifiers contains it.This is a member of the LM4871 family.There is an electronic part in the way of Surface Mount .This electronic component's maximum output power is 3W kWh per hour.Amp parts is important to keep the supply voltage (Vsup) above 2V so that the device functions normally.5.5V represents the maximal supply voltage (Vsup).The supply type of this electronic part is Single .The device is powered by a voltage of 5V volts.The electronic part belongs to the Boomer? series.There is 6.5mA external influence on the consumption of quiescent current: it consumes 6.5mA of quiescent current.
LM4871MX/NOPB Features
8-SOIC (0.154, 3.90mm Width) package
8 pin count
LM4871 family
3W kWh per hour
Boomer? series
LM4871MX/NOPB Applications
There are a lot of Texas Instruments LM4871MX/NOPB audio amplifiers applications.
- High-frequency data acquisition systems
- High input resistance broadband
- Logarithmic and exponential operation circuits
- Power control
- Test and measurement instruments
- Professional videography
- Vehicle electronics
- Power transmission
- Band-pass filter
- ECG equipment
