LM48822TLX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFBGA |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Boomer® |
| JESD-609 Code | e1 |
| Feature | Depop, Differential Inputs, I2C, Mute, Shutdown, Volume Control |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.33.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 2.4V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM48822 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.6V |
| Supply Voltage-Min (Vsup) | 2.4V |
| Number of Channels | 2 |
| Supply Current-Max | 4.5mA |
| Output Power | 40mW |
| Voltage Gain | 59.5dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Max Output Power | 40mW |
| Max Output Power x Channels @ Load | 40mW x 2 @ 32 Ω |
| Harmonic Distortion | 5.5% |
| Channel Separation | 95 dB |
| Height | 675μm |
| Length | 2.5mm |
| Width | 2.3mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM48822TLX/NOPB Overview
The device is embedded in 16-WFBGA .Amp parts is recommended that the chip be packaged in the case Tape & Reel (TR) .The 16 termination refers to terminating transmission lines with devices that match their characteristic impedance.This output is configured with Headphones, 2-Channel (Stereo) .This electrical device has the type Class AB .In a computer or other communication device, there are 16 pins, which are pronged contacts.The electronic part is positioned in the way of Surface Mount .In this electrical device, the supply voltage is 2.4V~5.5V .The chip is equipped with 2 channels.Amp parts is possible to guarantee Depop, Differential Inputs, I2C, Mute, Shutdown, Volume Control when operating.The operating temperature should not exceed -40°C~85°C TA °C.Amp parts is included in Audio/Video Amplifiers .Amp parts belongs to LM48822 family.Its recommended mounting way belongs to Surface Mount .There is a maximum output power of 40mW kWh per hour from this electronic component.Amp parts is important to keep the supply voltage (Vsup) above 2.4V so that the device functions normally.During this time, the maximum supply voltage (Vsup) reaches 3.6V .Amp parts is powered by a 3.6V volt power supply.The electronic part is a member of the Boomer? series.The maximal supply current amounts to 4.5mA .
LM48822TLX/NOPB Features
16-WFBGA package
LM48822 family
40mW kWh per hour
Boomer? series
LM48822TLX/NOPB Applications
There are a lot of Texas Instruments LM48822TLX/NOPB audio amplifiers applications.
- Weak signal detection
- Inverse/same-phase proportional circuit
- Scintillation detectors
- Information processing
- Switching amplifier
- Vehicle electronics
- Band-pass filter
- Computer workstations and wireless base stations
- pH (acidity)
- single/dual op amp sum and difference circuits
