LM48860TL/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFBGA, DSBGA |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Boomer® |
| JESD-609 Code | e1 |
| Feature | Depop, Shutdown, Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Audio/Video Amplifiers |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM48860 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Nominal Supply Current | 4.2mA |
| Output Power | 40mW |
| Supply Type | Single |
| Bandwidth | 22 kHz |
| Voltage Gain | 3.52dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Output Power | 50mW |
| Max Output Power x Channels @ Load | 50mW x 2 @ 32 Ω |
| Height | 675μm |
| Length | 2mm |
| Width | 1.8mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM48860TL/NOPB Overview
I have embedded this device in 12-WFBGA, DSBGA .Amp parts is recommended that the chip be packaged in the case Tape & Reel (TR) .12 terminations consist of terminating transmission lines with devices that match their characteristic impedance.Amp parts uses Headphones, 2-Channel (Stereo) as Amp partss output.This electrical device is classified as type Class AB .As part of the signal interface in a computer or other communication device, there are 12 pins.Electronic parts are mounted in the way of Surface Mount .This electrical device has a supply voltage of 2V~5.5V .2 channels are provided by the device.Operating with Depop, Shutdown, Thermal Protection is possible.No temperature higher than -40°C~85°C TA should be used for operations.Audio/Video Amplifiers contains it.This chip is included in the LM48860 family.The electronic part is mounted in the way of Surface Mount .As of this moment, the maximum Output Power of this electronic part is 50mW kWh per hour.A normal operation is dependent upon the supply voltage (Vsup) remaining above 2V .During this time, the maximum supply voltage (Vsup) reaches 5.5V volts.Electronic parts with Single supply types are available.Amp parts is a member of the Boomer? series of electronic parts.
LM48860TL/NOPB Features
12-WFBGA, DSBGA package
LM48860 family
50mW kWh per hour
Boomer? series
LM48860TL/NOPB Applications
There are a lot of Texas Instruments LM48860TL/NOPB audio amplifiers applications.
- Scintillation detectors
- Semiconductor detectors
- Instrumentation
- Video and image computer boards
- Weak signal detection
- Power control
- Portable electronic products powered by batteries
- Medical imaging
- Inverse/same-phase proportional circuit
- Signal transformation
