LM4890MM/NOPB
| Parameters | |
|---|---|
| Max Output Power x Channels @ Load | 1W x 1 @ 8 Ω |
| Harmonic Distortion | 2% |
| Load Impedance | 8Ohm |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Boomer® |
| JESD-609 Code | e3 |
| Feature | Depop, Shutdown, Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class AB |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 2.2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM4890 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.2/5.5V |
| Supply Voltage-Min (Vsup) | 2.2V |
| Number of Channels | 1 |
| Nominal Supply Current | 5mA |
| Quiescent Current | 5mA |
| Output Power | 1W |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 66dB |
| Max Output Power | 1W |
LM4890MM/NOPB Overview
The device is embedded in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .There is a package in the form of Tape & Reel (TR) .Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 8 termination.Amp parts uses 1-Channel (Mono) as Amp partss output.There is Class AB type of electrical device associated with this device.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. This electronic part is mounted in the way of Surface Mount .There is 2.2V~5.5V supply voltage for this electrical device.Amp parts is equipped wAmp partsh 1 channels.The operation of Depop, Shutdown, Thermal Protection can be ensured.Ideally, the operating temperature should not exceed -40°C~85°C TA .A total of 8 pins are present on the device.This part is included in Audio/Video Amplifiers .Amp parts is a member of the family LM4890 .This electronic part is mounted in the way of Surface Mount .As of this moment, the maximum Output Power of this electronic part is 1W kWh per hour.Amp parts is recommended that the supply voltage (Vsup) be maintained above 2.2V for normal operation.During this time, the maximum supply voltage (Vsup) reaches 5.5V .A Single supply type is used for this electronic part.Amp parts is powered by a 2.2/5.5V volt power supply.This electronic part is a member of Boomer? series.The device consumes 5mA quiescent current and is unaffected by external influences.
LM4890MM/NOPB Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
8 pin count
LM4890 family
1W kWh per hour
Boomer? series
LM4890MM/NOPB Applications
There are a lot of Texas Instruments LM4890MM/NOPB audio amplifiers applications.
- Industrial control system
- Instrumentation
- Logarithmic and exponential operation circuits
- Television broadcasting equipment
- Oscilloscopes
- Medical imaging
- Communication device
- Broadcasting
- Power control
- Signal operation
