LM49350RL/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-WFBGA, DSBGA |
| Number of Pins | 36 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Boomer® |
| JESD-609 Code | e2 |
| Feature | 3D, DAC, Depop, I2C, I2S, Mute, Short-Circuit and Thermal Protection, Shutdown, Volume Control |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Tin/Silver (Sn/Ag) |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM49350 |
| Pin Count | 36 |
| Output Type | 1-Channel (Mono) with Mono and Stereo Headphones |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 1.83.3V |
| Interface | I2C, I2S, Serial |
| Resolution | 3 B |
| Sampling Rate | 192 ksps |
| Power Consumption | 17.9mW |
| Max Output Power | 2W |
| Signal to Noise Ratio (SNR) | 96 dB |
| Max Output Power x Channels @ Load | 2W x 1 @ 4 Ω; 69mW x 2 @ 32 Ω |
| Number of DAC Channels | 2 |
| Number of Analog Inputs | 6 |
| Number of Analog Outputs | 4 |
| Height | 725μm |
| Length | 0m |
| Width | 0m |
| Thickness | 400μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM49350RL/NOPB Overview
In 36-WFBGA, DSBGA is embedded this device.Ideally, the chip should be packaged in a Tape & Reel (TR) case.There are 36 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Amp parts is configured to produce 1-Channel (Mono) with Mono and Stereo Headphones as Amp partss output.The device belongs to the Class D type of electrical devices.The 36 pins are pronged contacts which are part of a signal interface in a computer or other communication device.Amp parts is mounted in front of Surface Mount .There is 2.7V~5.5V voltage supply to this electrical device.Ensure that 3D, DAC, Depop, I2C, I2S, Mute, Short-Circuit and Thermal Protection, Shutdown, Volume Control is maintained when operating.The operating temperature should not exceed -40°C~85°C TA °C.There are 36 pins on this device.Audio/Video Amplifiers incorporates this part.Amp parts is part of the LM49350 family.The electronic part is mounted in the way of Surface Mount .An electronic part such as this has a maximum output power of 2W kWh per hour.Amp parts reaches 5.5V when the maximum supply voltage (Vsup) is reached.Power is supplied by a 1.83.3V volt source.The series Boomer? contains it.In addition, there are 2 DAC channels, which are capable of sampling analog outputs from numerical values that are converted to voltages.A total of 6 analog transmissions are available, which combine the input signal with the carrier signal to adapt data.There are 4 analog outputs available, which are the outputs from the DCS to converters.
LM49350RL/NOPB Features
36-WFBGA, DSBGA package
36 pin count
LM49350 family
2W kWh per hour
Boomer? series
LM49350RL/NOPB Applications
There are a lot of Texas Instruments LM49350RL/NOPB audio amplifiers applications.
- Proportional operation circuits
- Video and image computer boards
- Displayers for aircraft and air transportation control systems
- ECG equipment
- Scintillation detectors
- High-frequency data acquisition systems
- High input resistance broadband
- Television broadcasting equipment
- High speed sample
- Test equipment
