LM4950TS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-10 (9 Leads + Tab) |
| Number of Pins | 9 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | Boomer® |
| JESD-609 Code | e0 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Termination | SMD/SMT |
| Type | Class AB |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 9.6V~16V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM4950 |
| Pin Count | 4 |
| Output Type | 1-Channel (Mono) or 2-Channel (Stereo) |
| Operating Supply Voltage | 15V |
| Supply Voltage-Max (Vsup) | 16V |
| Number of Channels | 2 |
| Supply Current-Max | 30mA |
| Output Power | 7.5W |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 30mV |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Output Power | 7.5W |
| Max Output Power x Channels @ Load | 7.5W x 1 @ 8 Ω; 3.1W x 2 @ 4 Ω |
| Number of Amplifiers | 2 |
| Load Impedance | 4Ohm |
| Height | 4.8mm |
| Length | 10.16mm |
| Width | 8.687mm |
| Thickness | 4.572mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM4950TS Overview
In the TO-263-10 (9 Leads + Tab) package, it is embedded.Amp parts is packaged in the way of Tube .Amp parts is configured wAmp partsh an output of 1-Channel (Mono) or 2-Channel (Stereo) .An electrical device of type Class AB is involved.In a computer or other communication device, there are 9 pins, which are pronged contacts.The electronic part is positioned in the way of Surface Mount .Electrical devices like this one have a 9.6V~16V supply voltage.The chip is equipped with 2 channels.When operating, Depop, Short-Circuit and Thermal Protection, Shutdown can be ensured.The operating temperature should not exceed -40°C~85°C TA .The device contains 4 pins.As part of Audio/Video Amplifiers , this part is included.The LM4950 family includes it.This electronic part is mounted in the way of Surface Mount .A maximum output power of 7.5W kWh per hour can be achieved with this electronic part.16V is the maximum supply voltage (Vsup).There is a Single supply type on this electronic part.This is a member of the Boomer? series.Current supply is maximal at 30mA .As a result, there are 2 amplifiers, which are electronic devices that increase the voltage, current, or power of a signal.
LM4950TS Features
TO-263-10 (9 Leads + Tab) package
4 pin count
LM4950 family
7.5W kWh per hour
Boomer? series
LM4950TS Applications
There are a lot of Texas Instruments LM4950TS audio amplifiers applications.
- Biopotential
- Portable electronic products powered by batteries
- pH (acidity)
- Fast A/D and D/A converters, video amplifiers
- Signal operation
- Band-pass filter
- Multiplication and division circuits
- Weak signal detection
- Comparator
- Information processing
