LM4950TS/NOPB
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-10 (9 Leads + Tab) |
| Number of Pins | 9 |
| Weight | 113.398093g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | Boomer® |
| JESD-609 Code | e3 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 9 |
| Type | Class AB |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 9.6V~16V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Base Part Number | LM4950 |
| Pin Count | 4 |
| Output Type | 1-Channel (Mono) or 2-Channel (Stereo) |
| Max Output Current | 5A |
| Operating Supply Voltage | 15V |
| Supply Voltage-Max (Vsup) | 16V |
| Number of Channels | 2 |
| Quiescent Current | 16mA |
| Supply Current-Max | 30mA |
| Output Power | 3.1W |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 30mV |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Output Power | 7.5W |
| Max Output Power x Channels @ Load | 7.5W x 1 @ 8 Ω; 3.1W x 2 @ 4 Ω |
| Load Impedance | 8Ohm |
| Height | 4.8mm |
| Length | 10.16mm |
| Width | 8.687mm |
| Thickness | 4.572mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
LM4950TS/NOPB Overview
A device has been embedded in TO-263-10 (9 Leads + Tab) .In this case, it is packaged as Tube .As a consequence, there are 9 terminations, which involve ending a transmission line with a device matching the characteristic impedance of the line.Amp parts uses 1-Channel (Mono) or 2-Channel (Stereo) as the output.Amp parts is an electrical device of type Class AB .As part of a signal interface in a computer or other communication device, there are 9 pins, which are pronged contacts.This electronic part is mounted in the way of Surface Mount .This electrical device has a supply voltage of 9.6V~16V .2 channels are available on the device.When operating, Depop, Short-Circuit and Thermal Protection, Shutdown can be ensured.No temperature higher than -40°C~85°C TA should be used for operations.This device has 4 pins.The part belongs to Audio/Video Amplifiers .Amp parts belongs to the LM4950 family.This electronic part is mounted in the way of Surface Mount .This electronic part has a maximum output power of 7.5W kWh per hour.16V represents the maximal supply voltage (Vsup).Electronic parts with Single supply types are available.Amp parts is a part of the Boomer? series.The device consumes 16mA quiescent currentIn the case of 30mA , the maximum supply current is available.Its maximal output current of 5A maximizes its design flexibility.
LM4950TS/NOPB Features
TO-263-10 (9 Leads + Tab) package
4 pin count
LM4950 family
7.5W kWh per hour
Boomer? series
LM4950TS/NOPB Applications
There are a lot of Texas Instruments LM4950TS/NOPB audio amplifiers applications.
- ECG equipment
- Television broadcasting equipment
- Proportional operation circuits
- Communication
- Communication device
- Multiplication and division circuits
- High gain DC amplifier
- Proportional counter tubes
- Comparator
- Video conversion and routing
