LM4951SD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Boomer® |
| JESD-609 Code | e3 |
| Feature | Depop, Shutdown, Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.33.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 2.7V~9V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM4951 |
| Pin Count | 10 |
| Output Type | 1-Channel (Mono) |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 9V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.5mA |
| Output Power | 1.8W |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 30mV |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 66dB |
| Max Output Power | 1.8W |
| Max Output Power x Channels @ Load | 1.8W x 1 @ 8 Ω |
| Harmonic Distortion | 1% |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM4951SD/NOPB Overview
There is a device embedded in 10-WDFN Exposed Pad .Amp parts is recommended that the chip be packaged in a Tape & Reel (TR) case.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 10 termination.Amp parts uses 1-Channel (Mono) as the output.An electrical device of type Class AB is involved.There are 10 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. Amp parts is mounted in front of Surface Mount .This electrical device has a supply voltage of 2.7V~9V .The number of channels is growing strong/weak: 1 .When operating, it is possible to ensure Depop, Shutdown, Thermal Protection .Amp parts is recommended that the operating temperature do not exceed -40°C~85°C TA °C.The device is equipped with 10 pins.The part belongs to Audio/Video Amplifiers .This is a member of the LM4951 family.Amp parts is recommended to mount the chip in the way of Surface Mount .A maximum output power of 1.8W kWh per hour is possible for this electronic part.Amp parts is important to keep the supply voltage (Vsup) above 2.7V so that the device functions normally.Vsup reaches 9V at the maximum.There is a supply type of Single for this electronic part.This electronic part is a member of Boomer? series.
LM4951SD/NOPB Features
10-WDFN Exposed Pad package
10 pin count
LM4951 family
1.8W kWh per hour
Boomer? series
LM4951SD/NOPB Applications
There are a lot of Texas Instruments LM4951SD/NOPB audio amplifiers applications.
- Addition and subtraction operation circuits
- single/dual op amp sum and difference circuits
- Displayers for aircraft and air transportation control systems
- Precision measurement
- Weak signal detection
- Instrumentation
- Medical instruments
- Power control
- Industrial control system
- Oscilloscopes
