LM4970SD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Boomer® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Current Rating | 42mA |
| Frequency | 60Hz |
| Base Part Number | LM4970 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 4mA |
| Output Current | 42mA |
| Max Supply Current | 4mA |
| Topology | Boost |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 42mA |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 3 |
| Switching Frequency | 60Hz |
| Multiplexed Display Capability | NO |
| Height | 800μm |
| Length | 4mm |
| Width | 3mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM4970SD/NOPB Overview
14-WFDFN Exposed Pad saves board space. It adopts the way of Surface Mount for mounting.Initially, it emerges as a Linear with high efficiency and a high degree of reliability.The led light driver is capable of operating at the operating temperature of -40°C~85°C TA.There are many benefits for Backlight.The frequency of 60Hz determines how it operates.The terminations 14 are designed for its operation.The configuration of the board is built around 14 pins.The number of segments is estimated to be 3.It's mounted by Surface Mount.LED drivers are found under the base part number LM4970.There is no problem with the voltage of 5.5V.Further, it can be classified as Display Drivers based on its characteristics.At its minimal input voltage, it operates at 2.5V.For highest efficiency, it works with a minimal supply voltage of 2.7V.Supply current is limited to 5.5V at its maximum value.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 4mA.In this case, the load can only be supplied with 42mA current.It's possible for this electronic component to fully function when the switching frequency is maintained at 60Hz.Several applications make use of this LED driver from the Boomer? series.
LM4970SD/NOPB Features
Available in the 14-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 60Hz
Supply voltage of 5V
Switching frequency of 60Hz
LM4970SD/NOPB Applications
There are a lot of Texas Instruments LM4970SD/NOPB LED Driver ICs applications.
- LED backlight driver for LCD displays for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED Lightings for Inspection Devices
- LED Lightings for Industrial Equipment
- White LED Backlight for portable equipment
- A- lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Amusement Machines
- Other Electronic Devices
- Street lighting
