LM5008SDCX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5008 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 92 % |
| Voltage - Input (Max) | 95V |
| Output Voltage | 75V |
| Output Type | Adjustable |
| Max Output Current | 350mA |
| Voltage - Input (Min) | 9.5V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 485μA |
| Max Output Voltage | 75V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~600kHz |
| Control Technique | HYSTERETIC CURRENT MODE |
| Synchronous Rectifier | No |
| Min Output Voltage | 2.5V |
| Voltage - Output (Max) | 75V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 800μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5008SDCX/NOPB Overview
This harley voltage regulator utilizes the Tape & Reel (TR) package for optimized performance. This harley voltage regulator has 8 terminations. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. The space-saving 8-WDFN Exposed Pad package is available for this voltage regulator. DC DC switching regulator is configured with 1 outputs. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. During switching regulator operation, the operating temperature should remain at -40°C~125°C TJ. DC-DC switching regulators reach 50kHz~600kHz switching frequencies. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. There is a voltage regulator maximum input voltage of 95V. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. Voltage regulator is designed to provide a nominal input voltage of 48V to meet the operation requirements. This DC/DC regulator belongs to the LM5008 family. Voltage can be produced at 75V volts by voltage regulator. The switching regulator operation of the system is controlled by 8 pins. There should be at least a 2.5V volt output voltage for this switching regulator in order to make it work properly. A maximum output current of 350mA A is provided to meet the switching regulator operation requirements. Based on the maximal adjusting voltage regulator's output voltage of 75V, adjusting voltage regulator can be operated easily. An output voltage of 75V is provided by this regulator voltage. Voltage regulator consumes 485μA A of quiescent current without being affected by outside forces.
LM5008SDCX/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
LM5008SDCX/NOPB Applications
There are a lot of Texas Instruments LM5008SDCX/NOPB Voltage Regulators applications.
- Digital display device
- Driver circuits
- Photovoltaic power
- Smoke prevention equipment
- Surge protection circuits
- Shearing machines
- Terrestrial set-top boxes
- Refrigerators of central air conditioners
- Arc suppression circuits
- Packaging
