LM5010SDX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5010 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 91 % |
| Voltage - Input (Max) | 75V |
| Output Voltage | 70V |
| Output Type | Adjustable |
| Max Output Current | 1A |
| Operating Supply Voltage | 7.4V |
| Voltage - Input (Min) | 8V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 650μA |
| Max Output Voltage | 70V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~1MHz |
| Control Technique | HYSTERETIC CURRENT MODE |
| Synchronous Rectifier | No |
| Min Output Voltage | 2.5V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5010SDX/NOPB Overview
optimized performance is achieved by utilizing the Tape & Reel (TR) package in this voltage regulator. As you can see, this harley voltage regulator contains 10 terminations. The type of analog IC that this voltage regulator is equipped with is SWITCHING REGULATOR. In order to save space, this harley voltage regulator is available in the 10-WDFN Exposed Pad package. There are 1 outputs configured on the voltage regulator. Adjusting voltage regulator's output pins generate Adjustable output. Surface Mount-mounting is compatible with this switching regulator. Voltage regulators should be operated at -40°C~125°C TJ temperature while operating. This DC-DC switching regulator has a switching frequency of 100kHz~1MHz. Despite its low input voltage, this voltage regulator can operate. There is a voltage regulator maximum input voltage of 75V. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. For operation, switching regulator requires a nominal input voltage of 48V. In terms of category, this voltage regulator 12v falls into the Switching Regulator or Controllers category. In the particular voltage regulators, the LM5010 family is represented. The voltage DC DC switching regulator can produce is 70V volts. During switching regulator operation, 10 pins are used. There should be at least a 2.5V volt output voltage for this switching regulator in order to make it work properly. A maximum output current of 1A A is provided to meet the switching regulator operation requirements. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is 70V, which is the highest available. An input voltage of 7.4V is used to operate this harley voltage regulator. There is no external influence on harley voltage regulator as it consumes 650μA A of quiescent current.
LM5010SDX/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
Operating supply voltage of 7.4V
LM5010SDX/NOPB Applications
There are a lot of Texas Instruments LM5010SDX/NOPB Voltage Regulators applications.
- Drilling machines
- Large fire protection systems
- Product burn-in
- Special machining machine tools
- Window air conditioners
- Handheld GPS
- Bending machines
- Household control circuits
- Overvoltage protection circuits in TV sets
- Refrigerators of central air conditioners
