LM5020MM-1
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | NRND (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 630kHz |
| Base Part Number | LM5020 |
| JESD-30 Code | S-PDSO-G8 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Quiescent Current | 2mA |
| Output Power | 300W |
| Control Features | Frequency Control, Soft Start |
| Topology | Flyback |
| Min Input Voltage | 13V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~630kHz |
| Max Input Voltage | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 18ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Nominal Input Voltage | 48V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 80 % |
| Clock Sync | Yes |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
LM5020MM-1 Overview
It comes in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, so switching controller can be used for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. Transistor Driver dc switching's outputs (s) can be handled by it. 8V~15V is the operating voltage and supply voltage of the dc control. Work well in dc switchers with a -40°C~125°C TJ. With this switching controller, you can switch at 200kHz~630kHz. Surface Mount makes it suitable for general dc dc regulator. The dcdc regulator features Frequency Control, Soft Start for efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. The 8 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 48V. Other relevant dc to dc converter ics can be found by searching "LM5020". The switching converter has a total of 10 pins. The test statistics indicate that DC regulator outputs a voltage of 7V. In most cases, the output current of the dc dc regulator will be 100mA, so note that when you start the project. voltage regulator dc to dcs with a 80 % duty cycle are designed to be reliable when powered on and powered off. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controller operates at a frequency of 630kHz. A dc switching in a dormant state uses 2mA. 48V is the nominal working voltage. Since the dc switcher's maximum input voltage is 90V, the voltage must be regulated accordingly. Voltage 13V must be supplied.
LM5020MM-1 Features
Transistor Driver Outputs
Switching Frequency: 200kHz~630kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 630kHz
LM5020MM-1 Applications
There are a lot of Texas Instruments LM5020MM-1 DC to DC converter applications.
- ATMs
- Radio equipment
- CMM
- Wide-range voltage regulation circuits
- Scientific testing
- Grinders
- Scientific research
- Constant current circuits
- Shearing machines
- Smoke exhaust equipment
