LM5020SD-1/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.8mm |
| Frequency | 1MHz |
| Base Part Number | LM5020 |
| JESD-30 Code | S-PDSO-N8 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.25V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Voltage | 7V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 3mA |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Quiescent Current | 2mA |
| Output Power | 300W |
| Control Features | Frequency Control, Soft Start |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~630kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 18ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Nominal Input Voltage | 90V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 80 % |
| Isolation | Non-Isolated |
| Clock Sync | Yes |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5020SD-1/NOPB Overview
With a 10-WDFN Exposed Pad package, the switching controller is suitable for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With this function, you can deal with Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 8V~15V. Worked in a -40°C~125°C TJ dc switcher before. The switching controller can be switched at 200kHz~630kHz. Surface Mount makes it suitable for general dc dc regulator. Frequency Control, Soft Start provides dcdc regulator efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a DUAL terminal on the switching converters. An array of 8 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 48V. LM5020 can be searched for other relevant dc to dc converter ics. 10 pins are on switching converter. Statistically, DC regulator outputs 1.25V volts. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1A. The duty cycle of the voltage regulator dc to dc can be set to 80 % on power-up or power-down to ensure reliability. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. There is 1MHz frequency setting on the switching controller. Dormant dc switchings use 2mA. You can set the input voltage to 90V for nominal working status. A supply current of 3mA is used to power it.
LM5020SD-1/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz~630kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 1MHz
LM5020SD-1/NOPB Applications
There are a lot of Texas Instruments LM5020SD-1/NOPB DC to DC converter applications.
- Computer monitoring equipment of building
- CMM
- Low output voltage switching power supply circuits
- Gear/thread machining machines
- Solar power plants
- Fire elevators
- Window air conditioners
- Cutting machine tools
- Hydraulic presses
- SMT equipment
