LM5020SDX-1/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5020 |
| JESD-30 Code | S-PDSO-N8 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Quiescent Current | 2mA |
| Output Power | 300W |
| Control Features | Frequency Control, Soft Start |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~630kHz |
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 18ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 80 % |
| Clock Sync | Yes |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5020SDX-1/NOPB Overview
It comes in the 10-WDFN Exposed Pad package, which makes switching controller suitable for most applications. This dc motor controller can be used to generate outputs with 1 numbers. The pmic is packaged in Tape & Reel (TR) solid enclosure. There are Transistor Driver dc switching's output (s) that it can handle. dc controls with 8V~15V voltage are supplied and operated. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. In this switching controller, the switch can be set to 200kHz~630kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Frequency Control, Soft Start is used for efficient switching control in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Thare switching converters has a terminal (s) at DUAL . 8 terminations with various dc switching's functions. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. It is inputted with a DC switcher's voltage of 48V. You can find other relevant dc to dc converter ics by searching "LM5020". The switching converter has a total of 10 pins. DC regulator outputs 7V voltage based on test statistics. At most, the dc to dc regulator accepts 90V input voltage. You should note down the dc dc regulator's usual output current of 1A when you start a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 80 %. This Surface Mount makes DC switcher suitable for most prototypes and applications. It is estimated that this dc regulatorhas a maximum frequency of 1MHz. The dc switching utilizes 2mA when it is in a dormant state.
LM5020SDX-1/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz~630kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
LM5020SDX-1/NOPB Applications
There are a lot of Texas Instruments LM5020SDX-1/NOPB DC to DC converter applications.
- Program control systems
- Window air conditioners
- Imported equipment
- USB circuits
- Mobile phones
- Serial communication converter
- CMM
- Remotely powered electric motors
- Product burn-in
- Electrical power transmission
