LM5021MM-1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 500kHz |
| Base Part Number | LM5021 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 2.5mA |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~30V |
| Control Features | Frequency Control, Soft Start, Sync |
| Topology | Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Max Input Voltage | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 10 ns |
| Nominal Input Voltage | 15V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load |
| Max Duty Cycle | 80 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 20V |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
LM5021MM-1 Overview
In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the ac to dc converter is embedded.The AC/DC power converter Tape & Reel (TR) is available for this product.There is a AC/DC converter mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -40°C~125°C TJ °C so that it can deliver its performance.This AC DC converter employs SWITCHING CONTROLLER analog IC type.In this AC to DC transformer, the switching frequency is Up to 1MHz .This AC/DC converter is designed for use within the range of 8V~30V supply voltage (Vcc/Vdd).There are a total of 8 terminations.It contains 8 pins.There are 8 pins in total.There are no problem mounting the ac dc converters by Surface Mount .If you select the LM5021 family, you will be able to search for similar acdc converters.There are 1 outputs to be processed.The ac to dc conversions are contained in Switching Regulator or Controllers .It has been set to 100mA for the output current.Its output voltage amounts to 600mV .This power AC DC is capable of reaching high efficiencies when operating at a frequency of 500kHz .Here is the standard for REACH SVHC : No SVHC .The AC to DC converter input voltage can be powered under 30V .
LM5021MM-1 Features
Packaged with 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 100mA
LM5021MM-1 Applications
There are a lot of Texas Instruments LM5021MM-1 AC DC Converters applications.
- Open Frame Switching Power Supply
- Laptops and personal digital assistants
- AC?DC USB chargers for Cameras
- IoT Applications
- RCC SMPS
- Off--line Battery Charger
- Replaces linear transformers
- Portable Apparatus
- Cleaners
- Auxiliary Power Supplies
