Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Switching Regulator or Controllers |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.65mm |
Frequency |
500kHz |
Base Part Number |
LM5021 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Voltage |
600mV |
Input Voltage-Nom |
15V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Nominal Supply Current |
2.5mA |
Output Current |
100mA |
Voltage - Supply (Vcc/Vdd) |
8V~30V |
Control Features |
Frequency Control, Soft Start, Sync |
Topology |
Flyback, Forward |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
Up to 1MHz |
Max Input Voltage |
30V |
Control Technique |
PULSE WIDTH MODULATION |
Rise Time |
25ns |
Fall Time (Typ) |
10 ns |
Nominal Input Voltage |
15V |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
No |
Fault Protection |
Current Limiting, Over Load |
Max Duty Cycle |
50 % |
Output Isolation |
Isolated |
Voltage - Start Up |
20V |
Height |
860μm |
Length |
3mm |
Width |
3mm |
REACH SVHC |
No SVHC |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
LM5021MM-2 Overview
An embedded ac to dc converter is included in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.In Tape & Reel (TR) AC/DC power converter, it is available.A AC/DC converter of this type is mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -40°C~125°C TJ °C to deliver its optimal performance.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.In this AC to DC transformer, the switching frequency is Up to 1MHz .This AC/DC converter is designed for use within the range of 8V~30V supply voltage (Vcc/Vdd).As a result, it has a total of 8 terminations.On the ac/dc converter, there are 8 pins.The pins of the ac-dc converter count up to 8 .Surface Mount is the recommended mounting method for the ac dc converters.Based on the LM5021 family, you can search for similar acdc converters.Running 1 outputs is available.The ac to dc conversions are included in Switching Regulator or Controllers .AC to DC converter is set to 100mA for the output current.There is 600mV voltage output from it.A high efficiency can be achieved by operating at a frequency of 500kHz .It is possible to read the REACH SVHC standard at: No SVHC .Under 30V , it is possible to power the AC to DC converter's input voltage.
LM5021MM-2 Features
Packaged with 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 100mA
LM5021MM-2 Applications
There are a lot of Texas Instruments LM5021MM-2 AC DC Converters applications.
- Power Adaptors
- Chargers for cell/cordless phones
- Battery chargers for smart phones
- Replaces linear transformers
- Standby power supplies for VCR
- Universal input AC/DC adapters (15W - 45W)
- AC?DC USB chargers for Cell Phones
- Wireless System
- RCC SMPS
- Automotive Clusters