LM5021MM-2/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 500kHz |
| Base Part Number | LM5021 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2.5mA |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~30V |
| Quiescent Current | 2.5mA |
| Control Features | Frequency Control, Soft Start, Sync |
| Topology | Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 10 ns |
| Nominal Input Voltage | 15V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load |
| Max Duty Cycle | 50 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 20V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5021MM-2/NOPB Overview
In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the ac to dc converter is embedded.You can get it in AC/DC power converter Tape & Reel (TR) .The AC/DC converter is mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -40°C~125°C TJ °C in order for it to perform properly.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.Switching frequency reaches Up to 1MHz Hz.The AC/DC converter is capable of being used when the supply voltage is 8V~30V (Vcc/Vdd).In total, it has 8 terminations.On the ac/dc converter, there are 8 pins.In this ac-dc converter, there are 8 pins.Surface Mount is a suitable mounting point for the ac dc converters.Similar acdc converters can be found using the LM5021 family.A total of 1 outputs are to be processed.Switching Regulator or Controllers includes the ac to dc conversions.Current output is set to 100mA .This AC/DC converter produces a voltage of 600mV as its output.AC to DC converter reaches high efficiency when operated at a frequency of 500kHz .Here is the standard for REACH SVHC : No SVHC .Quiescent current is consumed at 2.5mA .
LM5021MM-2/NOPB Features
Packaged with 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 100mA
LM5021MM-2/NOPB Applications
There are a lot of Texas Instruments LM5021MM-2/NOPB AC DC Converters applications.
- Standby power supplies for IR
- Power adapters for monitors
- Adaptors for DSCs
- White goods
- Humidifier
- Set-top boxes
- Tablets
- Smartphones
- Lighting controls
- Power adapters for network devices
