banner_page

LM5021MMX-1

8 Terminations8V~30V 8 Pin LM5021 AC to DC power converter1 OutputsUp to 1MHz


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LM5021MMX-1
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 443
  • Description: 8 Terminations8V~30V 8 Pin LM5021 AC to DC power converter1 OutputsUp to 1MHz (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Switching Regulator or Controllers
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch 0.65mm
Base Part Number LM5021
Pin Count 8
Number of Outputs 1
Output Voltage 8.5V
Input Voltage-Nom 15V
Analog IC - Other Type SWITCHING CONTROLLER
Nominal Supply Current 2.5mA
Output Current 700mA
Voltage - Supply (Vcc/Vdd) 8V~30V
Control Features Frequency Control, Soft Start, Sync
Input Voltage (Min) 8V
Topology Flyback, Forward
Control Mode CURRENT-MODE
Frequency - Switching Up to 1MHz
Input Voltage (Max) 30V
Control Technique PULSE WIDTH MODULATION
Rise Time 25ns
Fall Time (Typ) 10 ns
Switcher Configuration SINGLE
Internal Switch(s) No
Fault Protection Current Limiting, Over Load
Max Duty Cycle 80 %
Output Isolation Isolated
Voltage - Start Up 20V
Length 3mm
Width 3mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

LM5021MMX-1 Overview


The ac to dc converter is embedded in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.There is a AC/DC power converter of Tape & Reel (TR) available.As you can see, this AC/DC converter is mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -40°C~125°C TJ °C in order for it to perform properly.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.As a result, the switching frequency reaches Up to 1MHz .This AC/DC converter is suitable for operation in the range of 8V~30V supply voltage (Vcc/Vdd).As a result, it has had 8 terminations.The ac/dc converter has a total of 8 pins.In this ac-dc converter, there are 8 pins.Surface Mount are the recommended mounting method for the ac dc converters.A similar acdc converter can be searched by using the LM5021 family.The number of outputs to run is 1 .The ac to dc conversions can be found in Switching Regulator or Controllers .AC to DC converter is set to 700mA for the output current.There is 8.5V voltage output from it.Based on a unique technique, the input voltage can be ensured to have the maximal value of 30V .

LM5021MMX-1 Features


Packaged with 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 700mA

LM5021MMX-1 Applications


There are a lot of Texas Instruments LM5021MMX-1 AC DC Converters applications.

  • Appliance Power Supplies
  • Universal Off-Line Power Supplies
  • IoT Applications
  • Adapters
  • Shaver Charger
  • Battery Chargers
  • AC?DC USB chargers for Cameras
  • ATX/BTX Auxiliary Power
  • Power adapters for network devices
  • Standby and Auxiliary Power Supplies

Write a review

Note: HTML is not translated!
    Bad           Good