LM5021MMX-2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5021 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 8.5V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 2.5mA |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | 8V~30V |
| Control Features | Frequency Control, Soft Start, Sync |
| Input Voltage (Min) | 8V |
| Topology | Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 10 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load |
| Max Duty Cycle | 50 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 20V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5021MMX-2 Overview
This ac to dc converter is embedded in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .You can get it in AC/DC power converter Tape & Reel (TR) .A AC/DC converter of this type is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~125°C TJ °C.The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.Up to 1MHz is the switching frequency.The AC/DC converter is capable of being used when the supply voltage is 8V~30V (Vcc/Vdd).A total of 8 terminations have been recorded.It contains 8 pins.There are 8 pins on the ac-dc converter.There are no problem mounting the ac dc converters by Surface Mount .The LM5021 family allows you to search for similar acdc converters.There are 1 outputs to be run.Switching Regulator or Controllers contains the ac to dc conversions.AC to DC converter is set to 700mA for the output current.In this AC to DC transformer, the output voltage is 8.5V .It is possible to ensure a maximum value of 30V for the input voltage using a unique technique.
LM5021MMX-2 Features
Packaged with 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 700mA
LM5021MMX-2 Applications
There are a lot of Texas Instruments LM5021MMX-2 AC DC Converters applications.
- SMPS house keeping power supplies
- AC?DC USB chargers for Cameras
- LED lights
- Automotive Telematics
- Cellular phone chargers
- Power tools
- Automotive Clusters
- Set -Top Box (STB) Power Supply
- Set-top boxes
- USB type-c v1.2 chargers with optional VDM
