LM5021NA-1/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 560kHz |
| Base Part Number | LM5021 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 8.5V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 2.5mA |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | 8V~30V |
| Quiescent Current | 2.5mA |
| Control Features | Frequency Control, Soft Start, Sync |
| Input Voltage (Min) | 8V |
| Topology | Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 10 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load |
| Max Duty Cycle | 80 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 20V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5021NA-1/NOPB Overview
An embedded ac to dc converter is included in 8-DIP (0.300, 7.62mm) package.The AC/DC power converter Tube is available for this product.Through Hole mounts this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ in order to ensure its performance.This AC DC converter employs SWITCHING CONTROLLER analog IC type.When the switching frequency reaches Up to 1MHz , the process is complete.The voltage range of the supply can be set to 8V~30V (Vcc/Vdd).It has a total of 8 terminations.The ac/dc converter has 8 pins.A total of 8 pins are present on the ac-dc converter.There are no problem mounting the ac dc converters by Through Hole .If you select the LM5021 family, you will be able to search for similar acdc converters.In this AC to DC transformer, there are 1 outputs to run.AC to DC converter is included in Switching Regulator or Controllers .Currently, the output current is set to 700mA .As a result, its output voltage is 8.5V .High efficiency can be achieved when AC to DC converters frequency is set to 560kHz .Unique techniques can be used to ensure input voltage at the maximum value of 30V .When the current is at 2.5mA , AC to DC converter consumes quiescent current.
LM5021NA-1/NOPB Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 700mA
LM5021NA-1/NOPB Applications
There are a lot of Texas Instruments LM5021NA-1/NOPB AC DC Converters applications.
- Remotely-controlled appliances
- Air conditioners
- Standby and Auxiliary Power Supplies
- Set-top boxes
- Off--line Battery Charger
- Air Conditioning
- LED lights
- Standby power
- PDAs
- Standby power supplies for TV
