LM5021NA-2/NOPB
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 560kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM5021 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | 8V~30V |
| Quiescent Current | 2.5mA |
| Control Features | Frequency Control, Soft Start, Sync |
| Input Voltage (Min) | 8V |
| Topology | Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 10 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load |
| Duty Cycle | 50% |
| Output Isolation | Isolated |
| Voltage - Start Up | 20V |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5021NA-2/NOPB Overview
8-DIP (0.300, 7.62mm) is the package in which the ac to dc converter is embedded.Tube case is available for the ac dc converter.In this case, the AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ in order to ensure its performance.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.When the switching frequency reaches Up to 1MHz , the circuit is closed.Supply voltage (Vcc/Vdd) does not need to exceed 8V~30V .There are a total of 8 terminations in it.There are 8 pins on this ac/dc converter.It are possible to mount thare ac dc converters by Through Hole .If you select the LM5021 family, you will be able to search similar acdc converters.AC to DC converter is necessary to run 1 outputs.The ac to dc conversions are contained in Switching Regulator or Controllers .Current output is set to 700mA .AC to DC converter is able to reach high efficiency when its frequency is 560kHz .With the aid of a unique technique, it is possible to ensure that the input voltage will be at the maximum value of 30V .Quiescent current is consumed at 2.5mA .
LM5021NA-2/NOPB Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 700mA
LM5021NA-2/NOPB Applications
There are a lot of Texas Instruments LM5021NA-2/NOPB AC DC Converters applications.
- Air Conditioning
- Standby power
- Appliances
- Handheld/Battery-Powered Systems
- WiFi Wireless
- Home appliances
- Small off-line low voltage power supplies
- Power adapters for network devices
- Replacements for bulky plug-in transformers
- AC/DC LED Driver applications
