LM5022MM
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5022 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 57V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 6V~60V |
| Quiescent Current | 3.5mA |
| Control Features | Frequency Control, Soft Start |
| Max Output Voltage | 60V |
| Input Voltage (Min) | 6V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~990kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 1.115MHz |
| Max Duty Cycle | 95 % |
| Clock Sync | Yes |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | NRND (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Feature | UVLO |
| Part Status | Not For New Designs |
LM5022MM Overview
With a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. The system can process Transistor Driver dc switching's outputs (s). 6V~60V is the supply voltage and the operating voltage of the dc control. Suitable for working in an dc switcher that has a -40°C~125°C TJ. With this switching controller, you can switch at 200kHz~990kHz. A generalization of dc dc regulator can be made using Surface Mount. To provide efficient switching control, Frequency Control, Soft Start is included in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of 10 terminations are available in dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input is 24V. Other relevant dc to dc converter ics will be returned if you search "LM5022". 10 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Input voltage of dc dc voltage regulator should be 6V. Based on the test statistics, DC regulator outputs voltage 57V. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. The duty cycle of the voltage regulator dc to dc can be set to 95 % on power-up or power-down to ensure reliability. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. There is a maximum frequency of 1.115MHz on this dc regulators. In dormant mode, 3.5mA is used. Datasheets state the switching converter can output up to 60V volts.
LM5022MM Features
Transistor Driver Outputs
Switching Frequency: 200kHz~990kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
LM5022MM Applications
There are a lot of Texas Instruments LM5022MM DC to DC converter applications.
- Mobile phones
- Imported equipment
- Geothermal power
- Shearing machines
- Product testing
- Game consoles
- Gear/thread machining machines
- Various CNC machine tools
- Hydrogen power
- PSRR circuits
