LM5022MM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 2MHz |
| Base Part Number | LM5022 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.25V |
| Output Type | Transistor Driver |
| Max Output Current | 1A |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 6V~60V |
| Max Supply Current | 4mA |
| Quiescent Current | 3.5mA |
| Control Features | Frequency Control, Soft Start |
| Max Output Voltage | 80V |
| Topology | Boost, SEPIC |
| Min Input Voltage | 6V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~990kHz |
| Max Input Voltage | 60V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Duty Cycle | 95 % |
| Clock Sync | Yes |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5022MM/NOPB Overview
As a result of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) compact design, the switching controller is compatible with most applications. 1 outputs can be generated with the dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. The program can handle Transistor Driver dc switching's outputs (s). A 6V~60V voltage is supplied to the dc control and used for operating it. Suitable for a -40°C~125°C TJ dc switcher. A switching controller such as this can switch at a value of 200kHz~990kHz . The Surface Mount allows it to be used for dc dc regulator in general. For efficient switching control, the dcdc regulator features Frequency Control, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. Thare switching converters has a terminal (s) at DUAL . 10 terminations with various dc switching's functions. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 24V nominal DC switcher's voltage input. Other relevant dc to dc converter ics will be returned if you search "LM5022". The switching converter has a total of 10 pins. In particular, switching converter is a type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 1.25V. You should note down the dc dc regulator's usual output current of 100mA when you start a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 95 %. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. Switching controller operates at 2MHz Hz. When the dc switching is dormant, it uses 3.5mA. The maximum input voltage of the dc switcher is 60V, so users need to limit the voltage accordingly. Voltage 6V must be supplied. DC switcher will not be able to provide an output current above 1A volts. As per its datasheet, the switching converter has a maximum output of 80V volts. There is a possibility that a current higher than 4mA will cause improper operation of the component and possibly damage switching voltage regulators.
LM5022MM/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz~990kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
Frequency: 2MHz
LM5022MM/NOPB Applications
There are a lot of Texas Instruments LM5022MM/NOPB DC to DC converter applications.
- Lathes
- Boring machines
- Electrical power transmission
- Balance equipment
- Medical monitoring systems
- Digital display device
- Remotely powered electric motors
- Large fire protection systems
- Medical equipment
- Telecommunications equipment
