LM5022MMX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5022 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 57V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 60V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 6V~60V |
| Quiescent Current | 3.5mA |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 6V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~990kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 1.115MHz |
| Max Duty Cycle | 95 % |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5022MMX Overview
In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller meets most application requirements. It is sufficient to generate 1 outputs with this dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 6V~60V voltage are supplied and operated. A -40°C~125°C TJ dc switcher is not a problem. This switching controller can switch at 200kHz~990kHz. The Surface Mount value makes it suitable for general dc dc regulator. Frequency Control, Soft Start provides dcdc regulator efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. A switching converters's terminal (s) sits at the DUAL position. A variety of terminations with 10 of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 24V. In addition to "LM5022", there are other relevant dc to dc converter ics you can find. Total pins of switching converter are 10. In particular, switching converter belongs to the Switching Regulator or Controllers family. Input voltage of dc dc voltage regulator must be 6V. DC regulator outputs 57V voltage according to the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. A duty cycle set at 95 % ensures voltage regulator dc to dc reliability during power-on and power-off. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. DC regulators have a maximum frequency of 1.115MHz. To run the voltage regulator dc to dc safely and reliably, users should apply 60V to the voltage regulator dc to dc. DC switching uses 3.5mA when it is dormant.
LM5022MMX Features
Transistor Driver Outputs
Switching Frequency: 200kHz~990kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
LM5022MMX Applications
There are a lot of Texas Instruments LM5022MMX DC to DC converter applications.
- Grinders
- Servo drive system
- Sensitive electronic devices
- Textile machinery
- Ball screw pair
- Serial communication converter
- Digital display device
- Motor controller circuits
- Telecommunications equipment
- Industrial controllers
