LM5025ASDX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5025 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Output Power | 300W |
| Control Features | Dead Time Control, Frequency Control, Ramp, Soft Start |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~580kHz |
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 80 % |
| Clock Sync | Yes |
| Output Phases | 1 |
| Height | 800μm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 800μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5025ASDX/NOPB Overview
Capsuled in the 16-WFDFN Exposed Pad package, the switching controller can be used for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 2. PMIC is packaged in a solid enclosure of Tape & Reel (TR). With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 8V~15V. Qualified to work in an dc switcher with -40°C~125°C TJ. This switching controller can switch at 200kHz~580kHz. dc dc regulator can be generalized using Surface Mount. DCDC regulator is controlled efficiently by Dead Time Control, Frequency Control, Ramp, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. A switching converters's terminal (s) sits at the DUAL position. Various 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input is 48V. Other relevant dc to dc converter ics will be returned if you search "LM5025". There are 16 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. The dc to dc regulator can only accept 90V input voltage. If you start a project, note down the dc dc regulator's usual output current of 1A. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 80 % during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. There is a maximum frequency of 1MHz for this dc regulators.
LM5025ASDX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz~580kHz
Dead Time Control, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
LM5025ASDX/NOPB Applications
There are a lot of Texas Instruments LM5025ASDX/NOPB DC to DC converter applications.
- ATMs
- Computer rooms
- Nuclear power plants
- Electric water heaters
- Laboratories
- Computer application technology
- Imported equipment
- SMT equipment
- Current source circuits
- Various precision measuring instruments
