LM5025BSD
| Parameters | |
|---|---|
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5025 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 7.6V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Output Power | 300W |
| Control Features | Dead Time Control, Frequency Control, Ramp, Soft Start |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 75 % |
| Duty Cycle (Max) | 71%, 73% |
| Clock Sync | Yes |
| Output Phases | 1 |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
LM5025BSD Overview
Capsuled in the 16-WFDFN Exposed Pad package, the switching controller can be used for a wide range of applications. For 2 outputs, the dc motor controller is appropriate. A solid enclosure of Tape & Reel (TR) surrounds pmic. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 8V~15V voltage are supplied and operated. Qualified to work in a -40°C~125°C TJ dc switcher. This switching controller can switch at 200kHz~400kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Dead Time Control, Frequency Control, Ramp, Soft Start for efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminals (s) are designed at DUAL. A variety of terminations with 16 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. A DC switcher's nominal voltage of 48V is input. A search for "LM5025" will reveal other relevant dc to dc converter ics. 16 pins are on switching converter. Switching converter type is specifically Switching Regulator or Controllers. A 7.6V voltage of DC regulator was detected in the test statistics. The dc dc regulator's usual output current is 3A, which should be noted down when you start a project. voltage regulator dc to dcs with a 75 % duty cycle are designed to be reliable when powered on and powered off. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator has a maximum frequency of 1MHz.
LM5025BSD Features
Transistor Driver Outputs
Switching Frequency: 200kHz~400kHz
Dead Time Control, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 75 %
LM5025BSD Applications
There are a lot of Texas Instruments LM5025BSD DC to DC converter applications.
- Household control circuits
- Thermal power
- Program control systems
- Current source circuits
- Driver circuits
- Balance equipment
- Smoke exhaust equipment
- Communication system
- Injection molding machinery
- Various CNC machine tools
