LM5025BSDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5025 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 7.6V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Output Power | 300W |
| Control Features | Dead Time Control, Frequency Control, Ramp, Soft Start |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 75 % |
| Duty Cycle (Max) | 71%, 73% |
| Clock Sync | Yes |
| Output Phases | 1 |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5025BSDX Overview
The switching controller fits in the 16-WFDFN Exposed Pad package and is ideal for most applications. For outputs of 2, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. There are Transistor Driver dc switching's output (s) that it can handle. 8V~15V is the operating voltage and supply voltage of the dc control. Worked in a -40°C~125°C TJ dc switcher before. There is a switch at 200kHz~400kHz that can be used with this controller. Surface Mount makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Dead Time Control, Frequency Control, Ramp, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a DUAL terminal on the switching converters. 16 terminations with various dc switching's functions. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 48V. LM5025 can be searched for other relevant dc to dc converter ics. Pins number 16 of switching converter in total. Particularly, switching converter is a type of Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 7.6V. It's important to remember that the dc dc regulator's normaloutput current is 3A, so you should note it down when starting a new project. A duty cycle set at 75 % ensures voltage regulator dc to dc reliability during power-on and power-off. DC switcher's Surface Mount qualifies it for most applications and prototypes. It is estimated that this dc regulatorhas a maximum frequency of 1MHz.
LM5025BSDX Features
Transistor Driver Outputs
Switching Frequency: 200kHz~400kHz
Dead Time Control, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 75 %
LM5025BSDX Applications
There are a lot of Texas Instruments LM5025BSDX DC to DC converter applications.
- Nuclear power plants
- Digital video recorders
- Smoke exhaust equipment
- Remotely powered electric motors
- Various CNC machine tools
- Wind power
- Correction machines
- Combined machine tools
- Sink circuits
- Handheld GPS
