LM5025CMTCX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5025 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 7.6V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Output Power | 300W |
| Control Features | Dead Time Control, Frequency Control, Ramp, Soft Start |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~580kHz |
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 91 % |
| Clock Sync | Yes |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5025CMTCX/NOPB Overview
It comes in a 16-TSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. 2 outputs are supported by the dc motor controller. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 8V~15V. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. In this switching controller, the switch can be set to 200kHz~580kHz. The Surface Mount value makes it suitable for general dc dc regulator. To provide efficient switching control, Dead Time Control, Frequency Control, Ramp, Soft Start is included in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminal (s) are designed at DUAL . The 16 terminations can be used for a wide range of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. A DC switcher's nominal voltage of 48V is input. LM5025 can be used to locate other relevant dc to dc converter ics. There are only 16 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. Statistically, DC regulator outputs 7.6V volts. It should be fully noted that the dc to dc regulator only accepts 90V input voltage at most. In most cases, the dc dc regulator's output current is 3A. This information should be noted when you begin working with the component. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 91 %. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator1MHz has the maximum frequency.
LM5025CMTCX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz~580kHz
Dead Time Control, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 91 %
LM5025CMTCX/NOPB Applications
There are a lot of Texas Instruments LM5025CMTCX/NOPB DC to DC converter applications.
- Surface processing equipment
- Driver circuits
- Scientific research
- Plate bending machines
- Injection molding machinery
- Cutting machine tools
- Textile machinery
- Radio equipment
- Correction machines
- Imported equipment
