LM5025SD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Base Part Number | LM5025 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Output Power | 300W |
| Control Features | Dead Time Control, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~580kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 80 % |
| Clock Sync | Yes |
| Output Phases | 1 |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5025SD Overview
With a 16-WFDFN Exposed Pad package, the switching controller is suitable for a wide range of applications. dc motor controller is suitable for 2 output generation. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 8V~15V voltage are supplied and operated. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. There is a switch at 200kHz~580kHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. Dead Time Control, Frequency Control, Ramp, Soft Start provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. There are many different types of terminations for 16. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 10V is input. In addition to "LM5025", there are other relevant dc to dc converter ics you can find. The switching converter has a total of 16 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. An input voltage of 8V is the minimum required for the dc dc voltage regulator. You should note that the dc dc regulator's usual output current is 1A. The maximum duty cycle of this voltage regulator dc to dc is set to 80 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controller operates at 1MHz Hz.
LM5025SD Features
Transistor Driver Outputs
Switching Frequency: 200kHz~580kHz
Dead Time Control, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 1MHz
LM5025SD Applications
There are a lot of Texas Instruments LM5025SD DC to DC converter applications.
- Adjustable voltage or current linear circuits
- Series voltage regulation circuits
- Household control circuits
- Product burn-in
- Terrestrial set-top boxes
- Analog precision reference circuits
- Digital video recorders
- Various precision measuring instruments
- Precision electronic equipment
- Constant current circuits
