LM5026MT
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 590kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM5026 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Output Power | 300W |
| Control Features | Dead Time Control, Frequency Control, Reset, Soft Start |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~590kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Nominal Input Voltage | 48V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 80 % |
| Duty Cycle (Max) | 70%, 80% |
| Clock Sync | Yes |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5026MT Overview
As a result of 16-TSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. dc motor controller is suitable for 2 output generation. Packaged in solid enclosures, this pmic has a Tube rating. A total of Transistor Driver dc switching's outputs can be handled by it. 8V~15V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. This switching controller can switch at 200kHz~590kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Dead Time Control, Frequency Control, Reset, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a DUAL terminal on the switching converters. A variety of dc switching's functions can be performed on 16 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 48V. LM5026 can be used to locate other relevant dc to dc converter ics. 16 pins are present on switching converter. Switching converter is a special type of Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 3.3V voltage. normally, the dc dc regulator's output current is 3A, which you should keep in mind when starting a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 80 % during power-up and power-down. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controller operates at 590kHz Hz. It is possible to set the input voltage to 48V for nominal working status.
LM5026MT Features
Transistor Driver Outputs
Switching Frequency: 200kHz~590kHz
Dead Time Control, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 590kHz
LM5026MT Applications
There are a lot of Texas Instruments LM5026MT DC to DC converter applications.
- Communication system
- Printing equipment
- Refrigerators of central air conditioners
- Combined machine tools
- Hydrogen power
- Smoke exhaust equipment
- Handheld GPS
- Experimental setup
- Precision electronic equipment
- Serial communication converter
