LM5026MT/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | LM5026 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 15V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 4.2mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Output Power | 300W |
| Control Features | Dead Time Control, Frequency Control, Reset, Soft Start |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~590kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Nominal Input Voltage | 100V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 80 % |
| Isolation | Non-Isolated |
| Duty Cycle (Max) | 70%, 80% |
| Clock Sync | Yes |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5026MT/NOPB Overview
In the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. For outputs of 2, this dc motor controller is suitable. Packaged in solid enclosures, this pmic has a Tube rating. It is capable of handling Transistor Driver dc switching's outputs (s). DC control operates at 8V~15V volts and has 8V~15V supply voltage. Qualified to work in an dc switcher with -40°C~125°C TJ. The switching controller can be switched at 200kHz~590kHz. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Dead Time Control, Frequency Control, Reset, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . 16 terminations with various dc switching's functions. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input of 48V. You can find other relevant dc to dc converter ics by searching "LM5026". Total pins of switching converter are 16. In particular, switching converter belongs to the Switching Regulator or Controllers family. According to the test statistics, DC regulator outputs 15V voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 3A. The maximum duty cycle of this voltage regulator dc to dc is set to 80 % to ensure reliability during power-up and power-down. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sA frequency of 1MHz is set for the switching controller. 100V is the nominal working voltage. It runs on a supply current of 4.2mA.
LM5026MT/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz~590kHz
Dead Time Control, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 1MHz
LM5026MT/NOPB Applications
There are a lot of Texas Instruments LM5026MT/NOPB DC to DC converter applications.
- Grinders
- Thermal power
- USB circuits
- Access control systems
- Bending machines
- Precision electronic equipment
- Electric heating, lighting
- Scientific research
- seismic instrument power circuits
- ATMs
