LM5026MTX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5026 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 7.6V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Output Power | 300W |
| Control Features | Dead Time Control, Frequency Control, Reset, Soft Start |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~590kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 80 % |
| Duty Cycle (Max) | 70%, 80% |
| Clock Sync | Yes |
| Output Phases | 1 |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5026MTX Overview
Capsuled in the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller can be used for a wide range of applications. It is sufficient to generate 2 outputs with this dc motor controller. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. With this function, you can deal with Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 8V~15V. Suitable for a -40°C~125°C TJ dc switcher. Switching can be done at 200kHz~590kHz with this switching controller. The Surface Mount value makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Dead Time Control, Frequency Control, Reset, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. DUAL are the position of the terminal of the switching converters. Different dc switching's functions can be applied to 16 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 48V volts. In addition to "LM5026", there are other relevant dc to dc converter ics you can find. There are 16 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. DC regulator outputs 7.6V voltage according to the test statistics. normally, the dc dc regulator's output current is 3A, which you should keep in mind when starting a project. It is set to 80 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulator1MHz has the maximum frequency.
LM5026MTX Features
Transistor Driver Outputs
Switching Frequency: 200kHz~590kHz
Dead Time Control, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
LM5026MTX Applications
There are a lot of Texas Instruments LM5026MTX DC to DC converter applications.
- Scientific testing
- Automatic plug-in machines
- Access control systems
- Analog precision reference circuits
- Digital precision reference circuits
- Printing
- Electric heating, lighting
- Bending machines
- Servo drive system
- Machining centers
