LM5026SDX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5026 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 7.6V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Control Features | Dead Time Control, Frequency Control, Reset, Soft Start |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~590kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 80 % |
| Duty Cycle (Max) | 70%, 80% |
| Clock Sync | Yes |
| Output Phases | 1 |
| Height | 800μm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 800μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5026SDX/NOPB Overview
The switching controller fits in the 16-WFDFN Exposed Pad package and is ideal for most applications. 2 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). There are Transistor Driver dc switching's output (s) that it can handle. Voltages 8V~15V are the dc control's supply voltage and operating voltage, respectively. Suitable for working in an dc switcher that has a -40°C~125°C TJ. There is a switch at 200kHz~590kHz that can be used with this controller. dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Dead Time Control, Frequency Control, Reset, Soft Start which allows efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. Various 16 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. 48V nominal DC switcher's voltage input. LM5026 can be used to locate other relevant dc to dc converter ics. Pins number 16 of switching converter in total. Specially, switching converter corresponds to type Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 7.6V voltage. You should note down the dc dc regulator's usual output current of 3A when you start a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 80 %. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. There is a maximum frequency of 1MHz on this dc regulators.
LM5026SDX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz~590kHz
Dead Time Control, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
LM5026SDX/NOPB Applications
There are a lot of Texas Instruments LM5026SDX/NOPB DC to DC converter applications.
- Hydro power
- Medical monitoring systems
- CNC system
- Product testing
- Injection molding machinery
- PSRR circuits
- Industrial robots
- Imported equipment
- Gear/thread machining machines
- Surface processing equipment
