LM5027AMH/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | LM5027 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 3 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 6mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 13V~90V |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 310kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 13 ns |
| Nominal Input Voltage | 90V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 90 % |
| Duty Cycle (Max) | 72.5% |
| Output Phases | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5027AMH/NOPB Overview
As a result of 20-PowerTSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. dc motor controller is suitable for 3 output generation. PMIC is packaged in a solid enclosure of Tube. It is capable of handling Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 13V~90V. A -40°C~125°C TJ dc switcher is not a problem. This switching controller can switch at 310kHz. Surface Mount makes it suitable for general dc dc regulator. Frequency Control, Ramp, Soft Start provides dcdc regulator efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. A switching converters's terminal (s) sits at the DUAL position. An array of 20 terminations of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis 48V volts. Other relevant dc to dc converter ics can be found by searching "LM5027". The switching converter has a total of 20 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. You should note that the dc dc regulator's usual output current is 3A. voltage regulator dc to dcs with a 90 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThe switching controller works at a frequency of 1MHz. A nominal working status is achieved when the input voltage is set to 90V. With a current supply of 6mA, it runs.
LM5027AMH/NOPB Features
Transistor Driver Outputs
Switching Frequency: 310kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
Frequency: 1MHz
LM5027AMH/NOPB Applications
There are a lot of Texas Instruments LM5027AMH/NOPB DC to DC converter applications.
- Nuclear power plants
- Remotely powered electric motors
- Radio equipment
- Arc suppression circuits
- Mobile phones
- Hydro power
- Hydraulic presses
- Experimental setup
- seismic instrument power circuits
- Medical monitoring systems
