LM5027AMHX/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5027 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 3 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 13V~90V |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 310kHz |
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 13 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 75 % |
| Duty Cycle (Max) | 72.5% |
| Output Phases | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5027AMHX/NOPB Overview
With its 20-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. For outputs of 3, this dc motor controller is suitable. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. Transistor Driver dc switching's outputs (s) are supported. This dc control operates at 13V~90V and has a 13V~90V supply voltage. Suitable for a -40°C~125°C TJ dc switcher. There is a switch at 310kHz that can be used with this controller. Surface Mount makes it suitable for general dc dc regulator. To provide efficient switching control, Frequency Control, Ramp, Soft Start is included in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Thare switching converters has a terminal (s) at DUAL . A variety of dc switching's functions can be performed on 20 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 48V. Other relevant dc to dc converter ics will be returned if you search "LM5027". There are a total of 20 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. It should be noted that the dc to dc regulator only accepts 90V voltage as input voltage. normally, the dc dc regulator's output current is 3A, which you should keep in mind when starting a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 75 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThere is a maximum frequency of 1MHz on this dc regulators.
LM5027AMHX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 310kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 75 %
LM5027AMHX/NOPB Applications
There are a lot of Texas Instruments LM5027AMHX/NOPB DC to DC converter applications.
- Computer-related products
- Computer application technology
- USB circuits
- Plate bending machines
- Product burn-in
- Smoke prevention equipment
- Terrestrial set-top boxes
- Low output voltage switching power supply circuits
- Direct power supply system
- Medical equipment
