LM5027MH/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5027 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 3 |
| Output Voltage | 15V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 6mA |
| Nominal Supply Current | 6mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 3mA |
| Voltage - Supply (Vcc/Vdd) | 13V~90V |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 490kHz |
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 13 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 90 % |
| Isolation | Isolated |
| Clock Sync | No |
| Output Phases | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM5027MH/NOPB Overview
Capsuled in the 20-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 3 output generation. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. 13V~90V is the operating voltage and supply voltage of the dc control. Work well in dc switchers with a -40°C~125°C TJ. With this switching controller, you can switch at 200kHz 490kHz. dc dc regulator is made easier with Surface Mount. For efficient switching control, the dcdc regulator features Frequency Control, Ramp, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. DUAL are the position of the terminal of the switching converters. There are many different types of terminations for 20. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. 48V nominal DC switcher's voltage input. Other relevant dc to dc converter ics will be returned if you search "LM5027". 20 pins are present on switching converter. Switching converter is a special type of Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 15V. The dc to dc regulator can only accept 90V input voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 3mA. The maximum duty cycle of this voltage regulator dc to dc is set to 90 % to ensure reliability during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulators have a maximum frequency of 1MHz. A current of 6mA is supplied to it. There is a nominal current supply of 6mA for this the controllers dc.
LM5027MH/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 490kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
LM5027MH/NOPB Applications
There are a lot of Texas Instruments LM5027MH/NOPB DC to DC converter applications.
- Automation technology
- Linear guide
- Grinders
- Sink circuits
- Servo drive system
- Packaging
- Digital video recorders
- Post equipment
- Photovoltaic power
- Product testing
