LM5027MHX/NOPB
| Parameters | |
|---|---|
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 13 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 90 % |
| Clock Sync | No |
| Output Phases | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5027 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 3 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 6mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 3mA |
| Voltage - Supply (Vcc/Vdd) | 13V~90V |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 490kHz |
LM5027MHX/NOPB Overview
In the 20-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. The dc motor controller is adquate to generate for 3 outputs. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. With this function, you can deal with Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 13V~90V. Suitable for a -40°C~125°C TJ dc switcher. The switching controller is capable of switching at the 200kHz 490kHz position. As it has a Surface Mount value, it can be used for general dc dc regulator. Switching control is made easier with the dcdc regulator's Frequency Control, Ramp, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . Different dc switching's functions can be applied to 20 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis 48V volts. Search for "LM5027" to find other relevant dc to dc converter ics. The switching converter has a total of 20 pins. The type is a particular Switching Regulator or Controllers of switching converter. The dc to dc regulator can only accept 90V input voltage. The dc dc regulator's usual output current is 3mA, which should be noted down when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 90 % to ensure reliability during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. There is a maximum frequency of 1MHz for this dc regulators. The nominal supply current for this the controllers dc is 6mA.
LM5027MHX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 490kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
LM5027MHX/NOPB Applications
There are a lot of Texas Instruments LM5027MHX/NOPB DC to DC converter applications.
- Imported equipment
- Household control circuits
- Handheld GPS
- Power supplies of electronic gadgets
- Magnetohydrodynamic power
- Elevator lighting
- Milling machines
- Product testing
- Lathes
- Automatic testing equipment
