LM5030MM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 600kHz |
| Base Part Number | LM5030 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 250mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 14V~90V |
| Control Features | Frequency Control, Soft Start |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Reference Voltage | 1.25V |
| Rise Time | 16ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 16 ns |
| Nominal Input Voltage | 90V |
| Max Duty Cycle | 49 % |
| Isolation | Non-Isolated |
| Duty Cycle (Max) | 50% |
| Output Phases | 1 |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5030MM/NOPB Overview
As a result of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) compact design, the switching controller is compatible with most applications. It is sufficient to generate 2 outputs with this dc motor controller. Packaged in solid enclosures, this pmic has a Cut Tape (CT) rating. The program can handle Transistor Driver dc switching's outputs (s). DC control operates at 14V~90V volts and has 14V~90V supply voltage. Suitable for work in a -40°C~105°C TA dc switcher. There is a switch at 200kHz 600kHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. For efficient switching control, the dcdc regulator features Frequency Control, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. A switching converters's terminal (s) sits at the DUAL position. 10 terminations with a variety of function. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. 48V nominal DC switcher's voltage input. LM5030 can be searched for other relevant dc to dc converter ics. There are only 10 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, the DC regulator outputs 250mV voltage. You should note down the dc dc regulator's usual output current of 100mA when you start a project. voltage regulator dc to dcs with a 49 % duty cycle are designed to be reliable when powered on and powered off. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Switching controller operates at 600kHz Hz. A nominal working status is achieved when the input voltage is set to 90V. It runs on a 2mA supply current.
LM5030MM/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 600kHz
LM5030MM/NOPB Applications
There are a lot of Texas Instruments LM5030MM/NOPB DC to DC converter applications.
- Flaw detection equipment
- Various precision measuring detectors
- Bending machines
- Remotely powered electric motors
- Driver circuits
- Large fire protection systems
- Automation technology
- Boring machines
- Ball screw pair
- Die casting equipment
