LM5030MMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5030 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 7.7V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 7.7V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 14V~90V |
| Control Features | Frequency Control, Soft Start |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 16ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 16 ns |
| Max Frequency | 1MHz |
| Max Duty Cycle | 50 % |
| Output Phases | 1 |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5030MMX/NOPB Overview
As a result of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) compact design, the switching controller is compatible with most applications. For 2 outputs, the dc motor controller is appropriate. The pmic is packaged in Tape & Reel (TR) solid enclosure. There are Transistor Driver dc switching's output (s) that it can handle. Voltages 14V~90V are the dc control's supply voltage and operating voltage, respectively. Workable in an dc switcher where -40°C~105°C TA is the -40°C~105°C TArm. Switching can be done at 200kHz 600kHz with this switching controller. The Surface Mount value makes it suitable for general dc dc regulator. The dcdc regulator features Frequency Control, Soft Start for efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . There are many different types of terminations for 10. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 48V. Other relevant dc to dc converter ics will be returned if you search "LM5030". 10 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Statistically, DC regulator outputs 7.7V volts. The dc to dc regulator is limited to 90V input voltage. You should note down the dc dc regulator's usual output current of 1.5A when you start a project. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. This Surface Mount makes DC switcher suitable for most prototypes and applications. There is a maximum frequency of 1MHz on this dc regulators. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 7.7V.
LM5030MMX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
LM5030MMX/NOPB Applications
There are a lot of Texas Instruments LM5030MMX/NOPB DC to DC converter applications.
- Network technology
- Access control systems
- Imported equipment
- Digital video recorders
- Computed tomography (CT)
- Product burn-in
- Computer application technology
- Analog precision reference circuits
- Product testing
- Injection molding machinery
