LM5030SD
| Parameters | |
|---|---|
| Output Voltage | 7.7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 14V~90V |
| Control Features | Frequency Control, Soft Start |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 16ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 16 ns |
| Nominal Input Voltage | 14V |
| Max Duty Cycle | 49 % |
| Duty Cycle (Max) | 50% |
| Output Phases | 1 |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.8mm |
| Frequency | 1MHz |
| Base Part Number | LM5030 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
LM5030SD Overview
It comes in the 10-WDFN Exposed Pad package, which makes switching controller suitable for most applications. 2 outputs can be generated with the dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 14V~90V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~105°C TA. There is a switch at 200kHz 600kHz that can be used with this controller. A generalization of dc dc regulator can be made using Surface Mount. For efficient switching control, the dcdc regulator features Frequency Control, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. A variety of terminations with 10 of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 48V. LM5030 can be used to locate other relevant dc to dc converter ics. There are only 10 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. As determined by the test statistics, the output voltage of DC regulator is 7.7V. In most cases, the output current of the dc dc regulator will be 1.5A, so note that when you start the project. voltage regulator dc to dcs with a 49 % duty cycle are designed to be reliable when powered on and powered off. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. Switching controllers work at 1MHz Hz. It is possible to set the input voltage as 14V for nominal working statuses.
LM5030SD Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 1MHz
LM5030SD Applications
There are a lot of Texas Instruments LM5030SD DC to DC converter applications.
- Automation technology
- Cutting machine tools
- seismic instrument power circuits
- Network technology
- PSRR circuits
- Smart grid
- Product burn-in
- Overvoltage protection circuits in TV sets
- Electrical distribution systems
- Various precision measuring instruments
