LM5030SD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5030 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 16V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 7.7V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 14V~90V |
| Control Features | Frequency Control, Soft Start |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 16ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 16 ns |
| Max Frequency | 1MHz |
| Max Duty Cycle | 50 % |
| Isolation | Non-Isolated |
| Output Phases | 1 |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5030SD/NOPB Overview
With its 10-WDFN Exposed Pad package, the switching controller fits the needs of most applications. For 2 outputs, the dc motor controller is appropriate. Tape & Reel (TR) solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. 14V~90V is the supply voltage and the operating voltage of the dc control. Qualified to work in an dc switcher with -40°C~105°C TA. It can switch at 200kHz 600kHz. A generalization of dc dc regulator can be made using Surface Mount. DCDC regulator is controlled efficiently by Frequency Control, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Switching converters are designed with the terminal (s) at position DUAL . 10 terminations with various dc switching's functions. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The DC switcher's nominal voltage is 48V. Other relevant dc to dc converter ics can be found by searching "LM5030". Total pins of switching converter are 10. The type is a particular Switching Regulator or Controllers of switching converter. According to the test statistics, DC regulator outputs 16V voltage. It should be noted that the dc to dc regulator only accepts 90V voltage as input voltage. It's important to remember that the dc dc regulator's normaloutput current is 1.5A, so you should note it down when starting a new project. It is set to 50 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. 1MHz is the maximum frequency of this dc regulators. To run the voltage regulator dc to dc safely and reliably, users should apply 7.7V to the voltage regulator dc to dc. With a current supply of 2mA, it runs.
LM5030SD/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
LM5030SD/NOPB Applications
There are a lot of Texas Instruments LM5030SD/NOPB DC to DC converter applications.
- Lathes
- Surge protection circuits
- Scientific research
- Product testing
- Various precision measuring instruments
- Sensitive electronic devices
- Current source circuits
- Household control circuits
- SMT equipment
- seismic instrument power circuits
