LM5030SDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5030 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 7.7V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 7.7V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 14V~90V |
| Control Features | Frequency Control, Soft Start |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 16ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 16 ns |
| Max Frequency | 1MHz |
| Max Duty Cycle | 50 % |
| Output Phases | 1 |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5030SDX Overview
With its 10-WDFN Exposed Pad package, the switching controller fits the needs of most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. Voltages 14V~90V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -40°C~105°C TA dc switcher. This switching controller can switch at 200kHz 600kHz. dc dc regulator is made easier with Surface Mount. To provide efficient switching control, Frequency Control, Soft Start is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. switching converters terminal (s) are designed to be at DUAL. Different dc switching's functions can be applied to 10 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 48V. Other relevant dc to dc converter ics will be returned if you search "LM5030". 10 pins are on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. As determined by the test statistics, the output voltage of DC regulator is 7.7V. Considering the dc to dc regulator can only accept 90V input voltage, it is important to take note of this. If you are starting a new project, you should note the dc dc regulator's typical output current is 1.5A. It is set to 50 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator's maximum frequency is 1MHz. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 7.7V.
LM5030SDX Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
LM5030SDX Applications
There are a lot of Texas Instruments LM5030SDX DC to DC converter applications.
- Machining centers
- Various precision measuring detectors
- Cutting machine tools
- Wide-range voltage regulation circuits
- Serial communication converter
- Various precision measuring instruments
- Domestic water pumps
- Bending machines
- Laboratories
- Terrestrial set-top boxes
