LM5032MTC
| Parameters | |
|---|---|
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 670kHz |
| Base Part Number | LM5032 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | 13V~100V |
| Output Power | 600W |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 13V |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Input Voltage (Max) | 100V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 12ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 10 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 76 % |
| Clock Sync | Yes |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
LM5032MTC Overview
It comes in a 16-TSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. Packaged in solid enclosures, this pmic has a Tube rating. The system can process Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 13V~100V. Suitable for work in a -40°C~125°C TJ dc switcher. With this switching controller, you can switch at 200kHz 600kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Switching control is made easier with the dcdc regulator's Frequency Control, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of terminations with 16 of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 48V is input. You can find other relevant dc to dc converter ics by searching "LM5032". Pins number 16 of switching converter in total. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the input voltage of the dc dc voltage regulator be 13V. At most, the dc to dc regulator accepts 100V input voltage. The dc dc regulator's usual output current is 2.5A, which should be noted down when you start a project. The duty cycle of the voltage regulator dc to dc can be set to 76 % on power-up or power-down to ensure reliability. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. A frequency of 670kHz is used by the switching controller.
LM5032MTC Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 76 %
Frequency: 670kHz
LM5032MTC Applications
There are a lot of Texas Instruments LM5032MTC DC to DC converter applications.
- Digital display device
- Power supplies of electronic gadgets
- Communication system
- Industrial controllers
- Network technology
- Telecommunications equipment
- Energy management systems
- Balance equipment
- SMT equipment
- Photovoltaic power
