LM5032MTC/NOPB
| Parameters | |
|---|---|
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 4.3mA |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 13V~100V |
| Output Power | 600W |
| Control Features | Frequency Control, Soft Start |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 12ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 10 ns |
| Nominal Input Voltage | 100V |
| Switcher Configuration | SINGLE |
| Threshold Voltage | 1.28V |
| Max Duty Cycle | 76 % |
| Isolation | Non-Isolated |
| Clock Sync | Yes |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | LM5032 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 300mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
LM5032MTC/NOPB Overview
It comes in the 16-TSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. 2 outputs can be generated with the dc motor controller. Tube solid enclosure protects the pmic. There are Transistor Driver dc switching's output (s) that it can handle. dc control's supply and operating voltages are 13V~100V. Work well in dc switchers with a -40°C~125°C TJ. With this switching controller, you can switch at 200kHz 600kHz. dc dc regulators can be carried out with Surface Mount. Frequency Control, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. The 16 terminations can be used for a wide range of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's voltage input is 48V. Searching "LM5032" will return other relevant dc to dc converter ics. There are only 16 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. The test statistics indicate that DC regulator outputs a voltage of 300mV. It's important to remember that the dc dc regulator's normaloutput current is 100mA, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 76 % to ensure reliability during power-up and power-down. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Switching controllers work at 1MHz Hz. 100V is the nominal working voltage. 4.3mA volts is the supply current.
LM5032MTC/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 76 %
Frequency: 1MHz
LM5032MTC/NOPB Applications
There are a lot of Texas Instruments LM5032MTC/NOPB DC to DC converter applications.
- Access control systems
- Medical monitoring systems
- Gear/thread machining machines
- Smart grid
- SMT equipment
- Refrigerators of central air conditioners
- Various precision measuring instruments
- Household control circuits
- Lathes
- Production lines
