LM5032MTCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5032 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | 13V~100V |
| Output Power | 600W |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 13V |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Input Voltage (Max) | 100V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 12ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 10 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 2MHz |
| Max Duty Cycle | 76 % |
| Clock Sync | Yes |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5032MTCX Overview
Capsuled in the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. 2 outputs can be generated with the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. Transistor Driver dc switching's outputs (s) are supported. The supply and operating voltage of the dc control are 13V~100V. Qualified to work in a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 200kHz 600kHz. dc dc regulators can be carried out with Surface Mount. Frequency Control, Soft Start provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of 16 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 48V. In addition to "LM5032", there are other relevant dc to dc converter ics you can find. Total pins of switching converter are 16. There is a particular type of Switching Regulator or Controllers in switching converter. The minimum input voltage of the dc dc voltage regulator should be 13V. This dc to dc regulator accepts only 100V input voltage at most. You should note down the dc dc regulator's usual output current of 2.5A when you start a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 76 %. This Surface Mount makes DC switcher suitable for most prototypes and applications. It is estimated that this dc regulatorhas a maximum frequency of 2MHz.
LM5032MTCX Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 76 %
LM5032MTCX Applications
There are a lot of Texas Instruments LM5032MTCX DC to DC converter applications.
- SMT equipment
- Experimental setup
- Combined machine tools
- Various CNC machine tools
- Refrigerators of central air conditioners
- Flexible manufacturing cells
- PSRR circuits
- Textile machinery
- Special machining machine tools
- Various precision measuring instruments
