LM5032MTCX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5032 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | 13V~100V |
| Output Power | 600W |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 13V |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Input Voltage (Max) | 100V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 12ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 10 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 2MHz |
| Max Duty Cycle | 76 % |
| Clock Sync | Yes |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5032MTCX/NOPB Overview
This switching controller fits most application requirements since it is packaged in a 16-TSSOP (0.173, 4.40mm Width) package. It is sufficient to generate 2 outputs with this dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. Transistor Driver dc switching's outputs (s) are supported. dc control's supply and operating voltages are 13V~100V. Worked in a -40°C~125°C TJ dc switcher before. This switching controller can switch at 200kHz 600kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Frequency Control, Soft Start provides dcdc regulator efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. DUAL are the position of the terminal of the switching converters. The 16 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 48V. Other relevant dc to dc converter ics will be returned if you search "LM5032". 16 pins are present on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. Input voltage of dc dc voltage regulator should be 13V. At most, the dc to dc regulator accepts 100V input voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 2.5A. Voltage regulator dc to dc is designed to operate at 76 % duty cycle during power-ups and power-downs to ensure reliability. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulator has a maximum frequency of 2MHz.
LM5032MTCX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 76 %
LM5032MTCX/NOPB Applications
There are a lot of Texas Instruments LM5032MTCX/NOPB DC to DC converter applications.
- Domestic water pumps
- Telecommunications equipment
- Mobile phones
- seismic instrument power circuits
- Emergency lighting monitoring equipment
- Serial communication converter
- Servo drive system
- Electric heating, lighting
- Hydraulic presses
- Household control circuits
