LM5033MM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 600kHz |
| Base Part Number | LM5033 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 9.75V |
| Output Type | PWM Signal |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 15V~90V |
| Output Power | 500W |
| Control Features | Frequency Control, Soft Start |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Max Input Voltage | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 16ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 16 ns |
| Nominal Input Voltage | 48V |
| Switcher Configuration | SINGLE |
| Output Phases | 1 |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5033MM Overview
With its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller fits the needs of most applications. For outputs of 2, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. PWM Signal dc switching's outputs (s) are supported. dc controls with 15V~90V voltage are supplied and operated. Qualified to work in a -40°C~125°C TJ dc switcher. It can switch at 200kHz 600kHz. A generalization of dc dc regulator can be made using Surface Mount. Frequency Control, Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminal (s) are designed at DUAL . A variety of dc switching's functions can be performed on 10 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 48V. LM5033 can be used to locate other relevant dc to dc converter ics. Switching converter has a total of 10 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. A 9.75V voltage of DC regulator was detected in the test statistics. In most cases, the dc dc regulator's output current is 100mA. This information should be noted when you begin working with the component. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controller operates at 600kHz Hz. It is possible to set the input voltage to 48V for nominal working status. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 90V.
LM5033MM Features
PWM Signal Outputs
Switching Frequency: 200kHz 600kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Frequency: 600kHz
LM5033MM Applications
There are a lot of Texas Instruments LM5033MM DC to DC converter applications.
- Electric heating, lighting
- Magnetohydrodynamic power
- Driver circuits
- Milling machines
- Window air conditioners
- Laboratories
- Machining centers
- Digital display device
- Analog precision reference circuits
- Low output voltage switching power supply circuits
