LM5033MMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5033 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | PWM Signal |
| Operating Supply Voltage | 9.6V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 15V~90V |
| Output Power | 500W |
| Control Features | Frequency Control, Soft Start |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 16ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 16 ns |
| Max Frequency | 1MHz |
| Output Phases | 1 |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5033MMX/NOPB Overview
The switching controller fits in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package and is ideal for most applications. This dc motor controller can be used to generate outputs with 2 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With PWM Signal dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 15V~90V. Qualified to work in an dc switcher with -40°C~125°C TJ. In this switching controller, the switch can be set to 200kHz 600kHz. A generalization of dc dc regulator can be made using Surface Mount. To provide efficient switching control, Frequency Control, Soft Start is included in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position DUAL . An array of 10 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis set to 48V. LM5033 can be searched for other relevant dc to dc converter ics. Switching converter has a total of 10 pins. Switching converter is a type of Switching Regulator or Controllers in particular. It should be noted that the dc to dc regulator only accepts 90V voltage as input voltage. The dc dc regulator's usual output current is 1.5A, which should be noted down when you start a project. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. This dc regulatorhas a max frequency of 1MHz. Users should apply 9.6V to operate the voltage regulator dc to dc safely and reliably.
LM5033MMX/NOPB Features
PWM Signal Outputs
Switching Frequency: 200kHz 600kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
LM5033MMX/NOPB Applications
There are a lot of Texas Instruments LM5033MMX/NOPB DC to DC converter applications.
- Electrical power transmission
- Boring machines
- Fire elevators
- Terrestrial set-top boxes
- Wind power
- Magnetohydrodynamic power
- Plate bending machines
- Automation technology
- Industrial controllers
- Laboratories
